![]() Equipment Measurements |
|||||
December 2007 Cerwin Vega CLS-215 Loudspeakers: MeasurementsPLEASE NOTE: Our standard is to provide the THD+N measurement at 90dB with a measuring distance of 2 meters (within the anechoic chamber). Since this speaker produced very low distortion levels under those conditions, we have added a second measurement performed at 95dB to give an indication of performance under higher-output conditions. In addition, we have also provide an additional Deviation from Linearity measurement at 100dB based on the good performance at 95dB. All loudspeaker measurements are performed independently at the National Research Council of Canada. Please click to learn more about how we test loudspeakers there. All measurement data and graphical information displayed below are the property of SoundStage! and Schneider Publishing Inc. Reproduction in any format is not permitted.
Microphone measuring position: midrange axis (41" from bottom of speaker) Grille: off Sensitivity: 91.5dB (averaged 300Hz-3kHz, 2.83V/1m) Frequency response, 20Hz - 20kHz
(measured @ 2m, plotted @ 1m) Frequency response, 20Hz - 20kHz
(measured @ 2m, plotted @ 1m)
Listening Window,
20Hz - 20kHz (measured @ 2m, plotted @ 1m)
THD+N @ 90dB, 50Hz -
10kHz (measured @ 2m) Additional
Measurement
Difference @ 90dB,
50Hz - 20kHz (measured @ 2m) Difference @ 95dB, 50Hz - 20kHz
(measured @ 2m) Additional
Measurement
Impedance curve Electrical phase |
|||||
![]() Copyright © 2007 Schneider Publishing Inc. All Rights Reserved |